2002 Subaru Legacy "heater controls" Questions

...the heater control unit on deskboad nothing change there is a resistor located under the dash which controls the settings for the fan if this has overloaded or blown up the blower motor wont ...

heater control valve? not sure if your controls are vacuum operated or cable, either way you need to remove the controls and inspect that hoses are not off or split, {do the **** test} and if cable is

I have a 1992 Subaru Legacy L and the heater is not working. Coolant is full 100%. but when I turn the heater on all that come through the vents is COLD AIR.....Brrrrr..... Used to the only way that I

Where is the heater resistor located on a 1991 subaru legacy? it will be either in a pack of resistors in the heater box or be part of the heater control module in which case the module has to be ...

...heater controls and the letters next to the gear shifter do not light up anymore - the lights for the main dash(speedometer etc,) still work. Is it just a fuse or a wireing problem it should be a ...

...heater core. If the vacuum line to the diaphram is cracked, broken, or loose then the same result. If everything looks correct, try moving your controls to full hot and checking the position of the ...

my subaru 1996 heater only blows cold air i have no thermostat in it the car would that be why htere is no hot air coming in Not really. that will allow water to flow freely and would take longer to ...

Heater stuck in the "on" position My legacy is constantly putting out heat, my fan switch still works for the speed, but the heater is always putting some heat into the cab. I move the temperature ...

...controls or are mine not working? http://legacygt.com/forums/showthread.php?t=26408&highlight=heater+control+lights Thys is how to take it apart ,and you will need, Two P#72351AC061 light bulbs . ...

2005 Subaru Legacy p0043 P0043 SUBARU - HO2S13 Heater Control Circuit Low P0043 Subaru HO2S13 Heater Control Circuit Low