1998 Plymouth Neon "jeep engine number situated" Questions

...Jeep Cherokee 6 cyl. Changing the oil pressure sending unit did not make a difference. I used a higher viscosity oil and that prolonged the life for almost another year. If you put an oil pressure ...

Jeep SRT 2007 engine light on? is it a blown head gasket? My engine light keeps coming on and stays on for days, sometimes it goes off, then go on after a day. - a previous situation that Might be the

jeep grand cherokee limited with 5.2. It has started to die when you let off gas. I have replaced fuel filter and have had voltage regulater/alt checked. In park, you can go to 1500rmps and let and it

...engine misfire on number 3 cylinder. the best fix, A code P0303 may mean that one or more of the following has happened: Faulty spark plug or wire Faulty coil (pack) Faulty oxygen sensor(s) Faulty ...

Jeep Cherokee turns over but won't start. 6 cyl. 4.0 L engine. I can turn the engine over but it won't start. Some times it will sputter and almost start but just can't. It use to be hard to start but

...jeep liberty (3.7)rear door lock is cycling and nothing is working, there is a buzz coming from the relay panel in the engine bay is making a buzz. the front console is cycling multiple light and the ...

engine light ever light? If the fluid is burnt and dark in color it has lost it's friction properties and the valve body doesn't like that. The valves wont move as they need to.Check, test and

jeep had a blown engine, I rebuilt it completely and it wont start. I have good compression and spark and fuel. timing marks are lined correct. is there any type of timing that I should know about? It

Jeep Liberty engine computer I posted the instructions below with a picture. Now I'm not sure if you are replacing but guessing you are. Just to let you know this computer type is famous for going

...jeep grand Cherokee laredo 4.0 6L properly. I tried installing the distributor per instructions from youtubers and a couple other websites but the car turns over but makes a grinding noise in the end ...