1998 Plymouth Neon "air bypass valve idle speed" Questions

...air-bypass valve and or throttle valve and upper intake, these area's get full of gunk and combustion residue over the miles and cause idle issues (stalls, low idle) like yours, Get a can of intake ...

...air bypass valve, it is made by a company called CRC, remove the air intake hose to the engine, hold the idle high so the engine won't stall, then spray the can of cleaner into the intake while ...

...air-bypass valve and throttle valve, they get full of gunk over the miles and cause idle issues (stalls) like yours, Get a can of spray intake cleaner from any local parts store, not carb spray, ...

air bypass valve located in the throttle body. It helps control idle speeds by allowing air to bypass the throttle plates as to increase the idle spedle Speed ActuatorIdle Speed Actuator Operation: It

air to bypass the throttle plate in order to maintain the proper idle speed. Do NOT attempt to clean the IAC valve. Carburetor tune-up cleaners or any type of solvent cleaners will damage the internal

controlled air bypass valve located in the throttle body. It helps control idle speeds by allowing air to bypass the throttle plates as to increase the idle speed. please rate and have agreat weekend:

...air bypass direction --- REMOVAL & INSTALLATION Disconnect the negative battery cable. To remove the IAC valve, first disconnect the negative battery cable, then the IAC wire harness plug Next, ...

...bypass air to maintain the correct idle speed.

Removal & Installation


Turn the ignition switch to the OFF position.
Disconnect the idle air control valve harness electrical ...

air bypass"  valve on the side of the throttle body where the air intake hose from the air cleaner is connected, the valve and the throttle butterfly get "sludged" up and this causes all kinds of

engine idling fast The most common reasons for a high idle speed is a sticking throttle, vac leak, or a faulty idle air bypass valve. The computer uses the valve to control idle speed.