plymouth reliant trouble code 26 either not getting fuel or spark 1= You must test the ignition syste, reset the ignition timing see the diagram2= Test the fuel pumpGod bless you
...module (computer) but still no spark . Is there something else? Can I test the module? How check ignition module ignition switch ...
...for a little while(about a month) Now cutting off again. any ideas You may need to replace the ignition module it sounds like a weak ignition component. Before doing this try retrieving the ...
i need to change the ignition coil on my chrysler reliant. dont know what it looks like or where it is in the engine Look for your distributor. It has 5 wires coming out of it, and 4 of them go to ...
Key got stuck upside down in my ignition.. It was not forced in but slide in and now will not come out.. Any idea's how to get it out with out damange to the ignition? Spray a little lubricant or ...
1982 reliant wagon why don't i have eny fire from my coil to my engine IGNITION MODULE
the sparkplugs arent firing it could be a computer but most likely its the coil or ignition module, or crank sensor if your car has one. Testing will confirm what is at fault.
i have no power to coil and fuel pump i have chick out wireing found no relay I'll have to assume you checked these with the ignition key on?
Question about Plymouth Reliant
My Plymouth reliant was warming earning an suddenly it shut off and I no lights when I turn the ignition. Headlights come on but nothing else. Can't crank it. The first thing to do is have the battery
...charging. When engine is running it should be 13.5V or so. The alternator needs power from the ignition switch for the stator coil. The ground for the stator comes from the power module. Then, ...
40 questions posted
Usually answered in minutes!
77 Questions
54 Questions
41 Questions
21 Questions
17 Questions