2003 Mercury Mountaineer "replace brake light" Questions

...have now run down my battrie Brake lights wont go off Replace the brake light switch at the brake pedal. Unplug it first and be certain the brake lights go off to be certain you're on the right

...brake light switch located underneath the dash at the brake pedal. It is faulty for sure and stuck on the brake mode thats why the brake lights are always on. You will have to have it replaced. Hope ...

...the brake light switch it bad replace that it located under brake pedal it could be that the brake pedal stays in the floor and does not retract...... it probably needs a spring or

...have a faulty Brake Light Switch, and it is stuck on. Replace your brakelight switch. Until you replace it, you could pull the breaker out of the fuse panel in order to keep your battery from

my 2003 mountaineer brake lights will not turn off when the car is not switched on. Advice please? There is a brake light switch on the brake pedal . Adjust it until the lights go off or replace it.

...brake light is on. Or check to see if your emergency brake is pushed in. Check your fuses for the cruise control. Hope this helps, James Booth ABS light comes on every now & then, but what I also ...

...brake swicth. If the rubber stopper is gone, worn down or broken, replace it or fill the gap with epoxy glue. Once repaired/replaced check that when you press the brake, the lights come on and when ...

brake light switch. How easy is that to adjust/replace? and where can I find instructions on how to do it? The switch rides on the shaft that the brake pedal is attached to. When you depress the pedal

brake lights wont turn off, how do I fix it or replace the problem? check the brake light switch for correct adjustment and operation. It is normally at the top of the brake pedal under the dash

...sides were out then u might have an issue That bulb is a double filament bulb. The brake filament is probably blown but the park light filament is good. Just replace the bulb and it should be