2003 Mercury Mountaineer "remove clutch fan water pump" Questions

...the fan from an 04 mountaineer I need to remove the fan to change the water pump...cannot figure it out. Can you help? Thanks This has a thread on fan clutch that you will need a spanner wrench

remove fan from water pump You need to loosen the fan shroud and then remove the blade from the fan clutch.

...remove fan clutch, fan blade and shroud from vehicle. Remove four screws and separate fan clutch from fan blade. Item Part Number Description 1 8509 Water Pump Pulley 2 57632-S Screw and Washer ...

remove the fan clutch from the water pump shaft and lift the shroud, fan and clutch all out together. remove two bolts in the center radiator support which let the radiator move forward an inch or so,

...REMOVE FAN CLUTCH AND FAN.YOU NEED FAN CLUTCH WRENCH AND A FAN CLUTCH PULLEY HOLDER.YOU CAN RENT TOOLS AT AUTO ZONE OR BUY THEM AT A AUTO PARTS STORE.THE FAN CLUTCH BOLTS ARE LEFT HAND THREAD. REMOVE ...

...J41240 FAN CLUTCH REMOVER AND INSTALLER. TORQUE FOR FAN CLUTCH NUT 41 LB FT. FOUR BOLTS TO FAN BLADE TORQUE 20 LB FT.WATER PUMP BOLTS TORQUE TO 11 LB FT. DONT NEED SPECIAL TOOLS REMOVE WATER

...Remove the fan clutch-to-water pump hub bolts and remove the fan and clutch assembly and the fan shroud. If necessary, remove the fan-to-fan clutch retaining bolts and separate the fan from the fan ...

...remove the clutch fan. Will that lose the pulley that's attached to the water pump? I don't see bolts holding pulley wheel to the water pump? Is it pressed on or will it become loose when I remove ...

clutch and remove fan shroud. -Remove fan clutch and water pump pulley from water pump. -Remove four bolts and one nut attaching A/C compressor mounting bracket to cylinder head and water pump. Do not

...remove your belt tensioner from old water pump 3- 15mm bolt, two different sizes and install on your new pump. you need, 10mm socket, 15mm socket, flat head screw driver, pliers to removed hose,fan ...