1994 Mercury Cougar "max second gear" Questions

...second gear i think and it will not shift out of it. Max speed is 40 mph with the rpms screaming, it will go off after a long time but this is agrivating. I have a 94 mercury cougar xr7 3.8 ltr Any ...

...MAX LEVEL THE CLUTCH IS NORMAL AND NOT TOO SOFT. I NEED HELP the transmission needs to be taken apart and have the second gear synchro replaced. i would start with just have BG sychro shift put in at ...

...03 ford explorer wont get into second gear. I can do a max of 25 mph...the overdrive light keeps flashing also. can you shift the gears manuly ? i am having same problem with mine if anyone has an ...

...going off while driving.please what are the solution Sounds like the solenoid(s) in the transmission are bad. I'm assuming the engine is shutting off because your maxing out the RPM's in second

...gear, engine revs up to the max properties with little to no forward motion. Rev Followed procedures as outlined in owner's manual: Have tried the foot on brake and manually shifting thru ...

...second hit first the car just did compression lock up ,now it is running rough and is back firering bad ? have a compression test done to check for valve problems. Check timing belt timing. At a 100 ...

...max 0.20% reading 0.32% fail second fast idle test co limits 0.20% reading 0.17% pass natural idle test co limits max 0.30% reading 0.28% pass is there any thing wrong with the car Before test use ...

...second gear in my manual tranny broken 1/2 shift fork or sheared roll pin. might be able to pull boot up, remove shift cover plate and if your lucky it's just a sheared roll pin, if fork is broken ...

...max manuel clutch cant put my truck in gear unless I turn it on and ride it on second gear. clutch goes down to the floor need to put tranny fluid in it. cant locate it first of all it takes clutch ...

...second gear, got up to 50 mph at 2000rpm. Before guessing at transmission problems, check the fluid level (car warmed up, engine running in Park on level ground) and have the PCM scanned for trouble ...