2001 Audi A4 "set cam amp crank timing" Questions

...set & ready to go. Then the heads had to be replaced. When the heads were replaced, the timing was lost. Now the vehicle won't crank. How do you reset the timing after it has been lost? ...

set the cam asnd crank back in time after I replace water pump Not doing the belt,you get instructions with it Go to You Tube Video & watch what you need No one can help you,if there is no vehicle

...SET THE TIMING ON THE CRANKSHAFT....ALSO I NEED TO KNOW THE T.D.C. ON THE #1 CYLINDER FOR THIS MODEL. single cam cam at 12 o clock crank at 6 o clock marks in rear timming cover twin cam cams marks ...

...set the timing marks before i replace the timing belt 3.5 engine do u take off the old belt & turn the 4 cams by hand toline up marks & crank pulley or keep turnning engine until they get in ...

...set the position of cam, crank, and chain marks to where this beast will crank up. I am going in it for the 5th time and would love to get it fired this time and stay running. I am starting to think ...

...broke, now it just won't start, it cranks but won't start Did you make sure you set cam & crank timing ? If the belt is off one tooth it will cause this. Recheck belt timing

...amp; cranke You will need the manual to see where the timing marks are.The timing marks should have been aligned before you removed the old belt.In short,how to do it is find #1 cyl tdc,both valves ...

...cam turns twice as fast as the crank & thus the dist & then you add vacuum advance Your setting the timing somewhere around 8 to 12 degrees The correct setting should be on the radiator ...

Peter Can you tell me where the timing marks should be set to? (cam & crank)4G63 twin cam this is for the 8 valve engine

...cam slightly moved so set at TDC and tried setting cam synchro at 26 degrees which was another timing preference. Still turns but won't start. I can't figure it out. If I do try to push the gas pedal ...