2001 Acura 3.2CL "front end" Questions

...fluid will come out. The other end is your hub at the lower end of the front strut and the wheel. Get a Chilton manual and good luck. You can swing it out without totally taking the front end

...front end My Acura 1.6 EL (Canadian model) has a rattle that sounds like it is coming from underneath the front end. When I start it I hear a rattle for a second or two. I also hear a rattle when I ...

front wheels shake Tires worn or loose parts in front end tie rod ball joint and so on

...Front end squeak in 97 Acura CL My 97 Acura has a re-accurring front end squeak. Ball joint was replaced twice. Last time replaced was 2 days ago and squeak is back. Do I live with the squeak or keep ...

...front left axle on my acura cl tyoe s but the axle doesnt want to go in. what am i doing wrong? If you have new axle from Parts store ,then it's probably a locking c-clip at the end of the spline ...

...cl right side under front park plug wires at curv you might have a plastic cover to remove first the EGR is located on the end of the head on transmishion side has plug on top and 2 nuts holding it ...

...the front end jerks, like it doesn't want to change gear, then it will **** like it kicks into gear and off I go. Check fluid level first on the transmission. You could have a possible pump

...front end while driving. The popping can also be heard while the car is stopped turning steering wheel back and forth. Its a 2003 ACURA CL NON S-TYPE Any sugguestions?I never fails that it has good ...

...front end of the vehice i am not sure what it is, all the help i can get i will take. i dont know to much on these acura's is this a common problem? the shake is probrally tire balance out of whack ...

...front end of the car replaced to try and get rid of some funny sounds and the braking problem was going through all of that. I have also replaced both wheel bearings. What could this be? Do I need to ...