2004 Suzuki Forenza "remove pump cover water" Questions

Ad

...pump is located behind the timing belt cover, which is the plastic shield you mentioned. Replacement of the waterpump involves removing the timing belt, which is an advanced repair. If you are not ...

Ad

Question about Suzuki Forenza

1 Answer

...pump located It is located inside the timing cover. The timing belt and associated parts for the timing belt need to be removed to get at it. The picture above is the location with the timing belt ...

Ad

...pump. Remove the threaded stud. Install the last bolt. Tighten the bolts to 89 in lbs (10 Nm). Remove J 43651. Install the access plate on the water pump sprocket to the timing cover. Install the ...

pump bolts Remove the threaded stud. Last water pump sprocket to water pump bolt and tighten the sprocket bolts to 89 inch lbs. (10 Nm). Remove the tool. Water pump sprocket access plate to the timing

...pump. 8.Remove the water pump cover bolts. 9.Remove the water pump retianer nuts. Remove the old gasket and clean. 10.On bench. Install the waterpump and cover but lreave the bolts finger tight. ...

Question about Suzuki Forenza

1 Answer

Remove water pump to timing chain housing nuts. Remove water pump attaching nuts. Remove water pump and cover assembly. Separate componets as necessary. WHEN INSTALLING WATER PUMP MAKE SURE YOU FOLLOW

...pump bolts. Remove the water pump. Installation NOTE: Ensure the mating surfaces between the water pump and the cylinder block (6010) are cleaned of any sealant material. Install a continuous ...

...REMOVE THE WATER PUMP.CLEAN THE SEALANT FROM THE MATING SURFACE AND REPLACE THE O-RINGS.INSTALL THE OUTER O-RING WITH THE WHITE PAINT MARK FACING THE FRONT OF THE ENGINE AND THE INNER O-RING BLACK ...

Question about Suzuki Forenza

1 Answer

remove water pump on my 98 buick century 3.1 liter Hello, To remove the water pump of your buick, please follow the steps below. They are quite technical but these steps will guide You through how You

Question about Suzuki Forenza

1 Answer

pump. Remove the water pump bolts and remove the pump from the engine. Fig. Exploded view of the water pump mounting-3.4L (VIN X) engine To install: Clean all parts well. Use care when scraping gasket

Not finding what you are looking for?
2004 Suzuki Forenza Logo

789 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Suzuki Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...