1987 Suzuki Samurai "install head block engine" Questions

Ad

...gasket and checked head, no signs of cracks what so ever. If the head gasket is installed properly and they head is o-kay as stated the only option left is a cracked engine block. Sorry for bad

Ad

...Install a new head gasket on the engine block. Make sure the camshaft sprocket timing marks are still aligned, as set during the removal procedure. Install the cylinder head. 3. Lubricate the bolt ...

Ad

head bolt threads. Install the cylinder head bolts. Tighten the cylinder head bolts in sequence on the first pass. Torque to: 22 ft. lbs. (30 Nm) Using a torque angle meter, tighten the long bolts (1,

Question about Suzuki Samurai

1 Answer

...install magnetic block heater The "block" is the center of the engine that everything is bolted to. Looking from the top down. First thing is the Intake manifold. It is bolted to the Cylinder head or ...

...head bolts. Install the new cylinder head bolts to the cylinder head. Following the sequence shown, tighten the attaching bolts to 40-60 Nm (29-44 lb-ft). Loosen all attaching bolts approximately two ...

...install, noting following: a. Clean cylinder head intake manifold, valve cover and cylinder head gasket surfaces. Ensure flatness of cylinder head and cylinder block gasket surfaces meets ...

Question about Suzuki Samurai

1 Answer

...the cylinder heads installed on it. That's one way of buying an engine. Along block is the same as a short block except it does have the cylinder heads and maybe the intake manifold as

...head gasket. Install the cylinder head bolts. Tighten the bolts in the sequence shown in the image below on the first pass to 30 [n-m] (22 lb ft). Use a torque angle meter in order to tighten the ...

Question about Suzuki Samurai

2 Answers

head bolt threads. Install the cylinder head bolts. Tighten the cylinder head bolts in sequence on the first pass. Torque to: 22 ft. lbs. (30 Nm) Using a torque angle meter, tighten the long bolts (1,

...Install the cylinder head in position. Lightly coat the head bolt threads and plate washers with engine oil. Install the bolts in the head. Uniformly tighten the head bolts in several passes in ...

Not finding what you are looking for?
Cars & Trucks Logo

289 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Suzuki Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...