1987 Suzuki Samurai "clunk noise shifting manual" Questions

Ad

Question about Suzuki Samurai

2 Answers

...manual lockouts were locked and the truck would not engage to 4WD. There isnt a noise no clunking or anything. Just wont engage. I think it is time for a new transfer case. or something is stuck. Can ...

Ad

...THE 4X4 ENGAGE BUT IT MAKES A VERY LOUD CLUNKING NOISE AND STOPS WORKING...ANY SUGGESTION?? if its manual shift,its internal damage,if its elect.shift could elect.shift motor and,or internal ...

Ad

Question about Suzuki Samurai

2 Answers

...clunk,is it in the rear end then maybe it is the rear end.you kinda need to be more specific if this information doesn't help i have a 2000 jimmy and my right rear shock at the top of the connector ...

Question about Suzuki Samurai

1 Answer

...noise and it does the same when i depress the gas again to resume acceleration. if i leave the manual shifting knob for the transfer case in neutral it drives fine. my question is why? and how do i ...

...noise after each shift 2000 BMW z3 manual 2.8 check the transmission fluid if bad then change it and the filter if it has one if that dont fix it then you have a transmission problem someone in the ...

Question about Suzuki Samurai

1 Answer

clunk noise I have been telling the dealer this and now the check engin light is on and now it shifts hard I had this problem before and they put in a cam sensor in and something else about 1" in

...clunk when shifting gears (sometimes). It usually doesn't happen at higher speeds. Basically the same noise happens when I hit bumps in the road. The car is manual transmission--does it sound like a ...

...noise. do get like a clunking sound shifting between first an reverse as you let the clutch out?.if so its probably a universal joint either the one up by the tranny or the one by the rear axle. 4th ...

Question about Suzuki Samurai

1 Answer

clunk or no real noise you are right to think it is a sensor. trash can get into the shift solenoids and make a trans act funny. you could drop the pan and replace the solenoids located in the back of

Question about Suzuki Samurai

2 Answers

...noise is heard then it could be the cv joints or shafts . sorry I couldn't clear it up more hope this helps. MANUAL SHIFT VALVE LINKAGE BROKEN OR DISCONNECTED.OR TRANSMISSION FLUID LEVEL TOO LOW ...

Not finding what you are looking for?
Cars & Trucks Logo

289 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Suzuki Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...