2000 Plymouth Grand Voyager "headlight problems relay" Questions

...problems, one being the dimmer switch, and the other being a shorted ground to the headlight relay. The other thing to check is for corrosion at the relay panel for your headlights and fan controls. ...

...relay is either behind driverside headlight or directly beneath that spot next to the radiator, does not look like a regular relay because it is electronic. Behind headlight it's riveted to body. ...

My 1999 Plymouth grand voyager headlights only turns on in high but not in dime. I thought it was the bulb and changed it but the same problem persist. Check your fuses, check the relay, check to see ...

...off, what's the problem? It would appear the headlight relay has failed on; if this is the case the lights will stay on no matter what position the switch is in. I hope this may have assisted you, ...

...are connected to fans and wires on temperature sensor...test temperature sensor underneath the headlights on the drivers side there is a relay that controls the fan. You have to jack the car up ...

...starter in it they go bad and cause these problems Exchange the horn relay with the light relay, they should be the same number. If horn starts acting up or lights become exorcised, it was the

...with it disabling the van. Plusgged in the old one and now it will not even turn over. But now the headlights work which they didn't before. i have the exact problem as above. and yet the dealership ...

Headlight relay Headlights won't work. Thinks it's the relay but don't know where it is. its probably the combination switch on the steering column, as these vehicles don't have a relay for the ...

...headlight relay is stuck on. or the daytime running light module or relay is bad. to confirm find the relay center and switch the headlight relay out with another relay with the same part# on it. ...

headlight. Also from the relay you can also check if the switch is supplying 12v to the relay coil with a voltmeter or a 12 volt probe tester. you may have a faulty relay but you could test this via a