1992 Mercury Grand Marquis "pull start replacment" Questions

start. Any idea or information would be greatly appreciated. Look for loose connections on and from the battery---dirty /corroded earth etc.. PUll the starter and have a bench test done to find faults

...ignition control module was bad so i replaced it. then i gapped and put in new spark plugs when i pulled the old one i noticed they were soaked with gas around the tfreads from me trying to start

...way to turn the dome lights on. If that is okay start checking the door switches one of them has gone bad and needs replaced. You will have to pull the switch out of the door jam to check the

...is located. I removed the air filter and the car turned on. It looks like it has problems breathing/pulling air. I don't really know. Hello, Black smoke is usually a sign of the accelerator pump set ...

I am trying to replace a power steering pump pulley on a 1998 Grand Marquis but noticed that the steering pump shaft does not have any threads therefore I cannot install Power Steering Pump Pulley ...

...got this resolved. I drove the car for about a solid month. One day after coming home from work, I pulled in the driveway, turned off the car and went inside. About 1/2 in hour later came back out

...pull out the switch to trun my lights on for the outside and dashboard of my car all the lights start to flicker and the turn completely off unless i jiggle the switch a little bit but it still will ...

...it checked it was good put it back didnt make a diffence. hooked the battery back up and started pulling fuses and pulled the number 4 fuse inside the car under the dash. with the fuse puged in my ...

...pull out my headlight switch thay stay on for a a sec. the they start flashin on and of and then there is a frizing nosie that sound like some wires are toching in the dash bord. bad headlight switch ...