1988 Chrysler New Yorker "hunk" Questions

...1988 3.0 fwd Most control solenoids are in the pan, where the filter is located, there is a big hunk of steel with a bunch of little channels in it, the valve body, it holds the shift solenoids ...

Every time I start my jeep it well hunk/ chirp how do I stop that Does it hunk/chirp and then start running? If so have someone watch with the hood open and see if they can isolate the hunk noise. The

...THE TOP RADIATOR HOSE DOWN TO THE ENGINE BLOCK...THE THERMOSTAT WILL BE LOCATED IN A BULB SHAPED HUNK OF METAL AT THE END OF THE TOP HOSE...HUNK OF METAL SHOULD BE FASTENED WITH 2

...asociated with door slap,must be a loose/worn wire,close to the horn,touching the car chasis,also hunk on driving over a bad street (as it gets shaked).Need to ceck the wires.If asociated with ...

the horn wont hunk.. the fuse underhood is good.. no srs on dash.. need to see if there is another main relay and were is located?? have you checked the horn itself to make sure its working and not ...

...I get a new socket? Mine broke into pieces accidentally. The Toyota dealer wants $65 for a little hunk of metal!!!!!! most auto stores sell universal replacement inserts or go to a ...

...drain hole which could cause the evaporator to freeze and then it won't blow cold air as it solid hunk of ice ...

My horn on my 2006 pt cruiser makes a low hushing sound instead of hunking. Where is the fuse box and fuse located to replace. Would check horn unit because if it making a sound means fuse and horn ...

...cable, will start but then wont restart after shut off any suggestions i've had to tow this hunk o junk 3 times now anything at all for suggestions would be great How about crankshaft ...

...hazard lights do not flash (but the alarm is working fine)??? I just got one today. To get it to hunk and flash, press the lock bottom once, wait 1second and press it again. If that does not