2004 Chrysler 300 "engine miss under load" Questions

engine check light comes up Sounds to me that you have a cylinder miss fire. Chrysler products generally set a code when a miss fire is detected. Does the shaking go away under a load (while driving)

engine light and no codes. Runs much better but still misses under load. (going up a hill or passing on the expressway). Any help would be much appreciated! check fuel pressure if its low then it will

1991 ford f250 engine miss under load replaced plugs and wires still misses under load stretched timing chain

engine misses when going up incline until I let off gas Missing under load can be caused by a number of different things including: a bad sparkplug bad ignition wires if your car is old enough, bad ...

miss fire code. Engine has never stumbled or has a miss in it. This happens only when under a load like pulling my travel trailer. Driving down road and not under a load it is fine. It does have a bad

...to shift into the higher gears so it is preventing it. This could be caused by your engine not running right under load, bad gas, bad plugs or something that is causing your engine to miss under ...

...miss. Engine miss is at the same rpm regardless of all the changes. Have had three different auto stores and one repair shop run the engine codes with no results. I am currently stumped, can find ...

...idle. If under load, it is likely ignition related. Spray water on the wires and coils with the engine running. If they are carbon tracking it will be very obvious as the engine will miss

...Under load engine misses and will not run above 3,000 rpms. Engine backfires under load. Checked timing many times and tried in different spots. Removed and cleaned carbon from EGR valve.Open exhaust ...

...miss fire's, what am I missing? Some general thoughts - - when you try to accelerate, a couple of things happen. The engine shifts sometimes, and you put it under a load unlike when it is idling. ...