1999 Plymouth Grand Voyager "dash board gage" Questions

...dash. You move the wires and it will go out. Then it will come back and go out again. Help! It has a cracked board in the cluster. This is a common problem. When you move the connector on the cluster ...

dash board fail, or the connection to the dash board is damaged or not connecting to the pin board, there is a main socket the the dashboard is fitted to ie pushed on sometimes it can come away or the

hon da wiring diagrams need wiring diagram for dash gauges Your dash gages have one plug on them and one big flexible plastic circuit board that runs all the gages no wires

...dash board uses ribbon connectors to connect to the wiring harnesses. Make sure the connectors haven't come free. You can pick up a used one that works from a parts yard for about $25 and replace the ...

...problem. They work when a bump is hit and then stop working the same way. If that has the digital dash there is a crack in the circuit board on back of dash board it will need to be

body knows what cud be the problem IF it is not the sending unit then it is gauge and the gauge is mounted to a flexible membrane circuit board in the dash. It could be a loose connection on the board

...dash board and gage reads ok and then not ok then your gage is not doing ok but if you have a regular bulb with not gage i recomend you to install a volt metter straight on the batterie and pound on ...

speedometer stuck at 55, gas gage stuck and RPM gage stuck You have to change the main cables behind the dash board because they froze shut on you.

...dash board from the firewall or at a connection under the dash board. Or if your dash board is controlled by a circuit board. Best Bet, Have an electrical auto shop in your area take a look, many ...

...fix these problems. sending unit or float in gas tank, check if any broken wires or well plugged in and then check the float for the gas. you need to change your dash board !! When uncle have more ...