...45). Have you herd of this? I will check the harmonic balancer though. Thanks again for your help and Merry Christmas yes of course basically what there going to do is use a shorter belt about 2.2 cm ...
...45 degrees additional clockwise rotation using an angle indicator.Hexagon Head Bearing Cap Sub-Assembly Bolts1ZZ-FE Engine 18.5 Nm (14 ft.lb)2ZZ-GE Engine 18 Nm (13 ft.lb)Connecting rod:1. Apply a ...
...45 degrees additional clockwise rotation using an angle indicator. Hexagon Head Bearing Cap Sub-Assembly Bolts 1ZZ-FE Engine 18.5 Nm (14 ft.lb) 2ZZ-GE Engine 18 Nm (13 ft.lb) Connecting rod: 1. Apply ...
Question about Plymouth Grand Voyager
45 Nm (450 Kgf-cm or 33 ft lbs.) Replace any head bolt that will not torque to the above specs. Second: after all ten bolts are torqued to the above specs, the head bolts are then "Torqued to Distance
...45 minutes to an hour to perform at a Hyundai service department. If you are the original owner of the vehicle or it has less than 60,000 miles, this repair procedure is no cost to the owner. Hope ...
...cm). You can use a normalwrench for this, but it takes forever--so I made a special tool bytaking a cheapo 13 mm open-jaw wrench and bending it to a 45-degreeangle just below the jaws (cut it to ...
851 questions posted
Usually answered in minutes!
526 Questions
373 Questions
335 Questions
133 Questions
74 Questions