...jaw Gear Puller Screwdrivers Timing Light Timing Belt Cover Gasket Set New Timing Belt Drain Pan Antifreeze Jack Jack stands Take a look at this link as it is a walk through for a miata but the ...
...jaw puller from the parts store, because the pumps don't come with the pulley... follow the instructions! -Install the pulley on the new pump- I did this by using a bolt and washer that you tighten ...
jaw puller, specific for Chrysler products and a few other vehicles. I comes with three various length rods that slide into the hole in the end of the crankshaft and into the end of the puller bolt to
...memove a clutch pilot bearing, it is a roller type bearing, i was useing a bearing puller but the jaws on the puller wouldn't fit over behind the bearing, i believe the bearing was knock in ...
Question about Ford Cars & Trucks
Does ford 5.8 engine require a specific puller to remove harmonic balancer, or can I use an universal puller? Use a puller that has bolts. A jaw type puller will destroy the balancer
...jaw puller and wrap a ratchet strap around the puller to where the jaw puller claws are on snug and use the strap and tighten it down and screw in the center bolt use an inpact wrench just hit the ...
how to remove crankshaft pully requires a puller. A 3-jaw puller might work, but there is a puller made for crankshaft pulleys/dampers
...attatch the gear puller to the back of the adapter and use the vice grips to hold the puller jaws together and slowly pull the adapter
...puller 2/3 jaw. it still is not coming out the screw is not long enough. i got it from auto zone and they told me it was the tool to use the were wrong a three jaw that clamps around the outer rim ...
...Not the two or three armed pulley puller, but a harmonic balancer pulley puller-the pullers with jaws that hook around the outside of pulley can ruin a harmonic balancer. Use the impact gun to ...
984 questions posted
Usually answered in minutes!
759 Questions
706 Questions
479 Questions
410 Questions
344 Questions