1997 Plymouth Voyager "broke cv joint" Questions

...the car from the side at the axles. then start and put in gear to see if one of the axles turns but car dont move. if it spins then the outer cv joint is broke or the splines in the hub are

got stuck when i revearsed heard a bang from the front then the van would not go heard grinding sounds cv joint broke ....check inner side of both drive axles

...broke or damaged or if the gears are damaged never seen an axle fall out--you may have major damage. If you are lucky, the cv joint may have failed suddenly without damaging the tranny or wheel ...

...CV joint jack up the side that broke and remove the wheel. Then remove the center nut that holds the CV joint to the hub. Put the car in gear or park so the hub will not turn why you do this or have ...

...but the car doesn't move? If that's the case, you probably broke a cv joint/axle when u went into the ditch. If the cv joint or axle breaks, the engine and drive train can't spin the front

...cv axle broke i put my truck in to 4hi and started moving foward when it began to feel like it was going underload and then bang got out and cv axle busted through it seat. i have a 4inch lift on 35. ...

...cv joint broke and rear part is stuck to transmittion.. There are two types of cv joints used. One type bolts on the other you have to pop out. Do this by prying it out with a big screwdriver. A ...

...CV was damaged as well (lack of lubrication from defective boots)., this is the noise u are hearing I am sure. my 97 maxima was making the same sound and after a while it just stoped, when i changed ...

BROKE FRONT CV JOINT ON PASSENGER SIDE THE PART THAT CONNECTS TO THE SIDE OF TRANSMISSION WHAT IS THIS PART CALLED called a new cv joint.

...surely you will get a knocking metal noise, unless broke in the center cv joint. Jack it up and turn the wheel/wheels by rotating them with your hands.Surely something you will hear. Good