1994 Plymouth Voyager "tube water pump replacement" Questions

Ad

Question about Plymouth Voyager

1 Answer

water outlet tube leaks how do I replace water outlet tube O Ring on a 1998 Voyager 3.0 It inserts into back of water pump.Need I say more? Sorry.

Ad

...water pipe inlet tube. Wet a new O-ring with water and install it on the water inlet pipe. Install a new gasket on the water pump. Install the pump inlet opening over the water pipe and press until ...

Ad

...water pump housing.Take the radiator hose off of the tube and then the two bolts need to be removed. Now try to pry against the bracket the the bolts were in and move the tube away from the engine. ...

replace the cooling tubes that run across the engine valley under the intake. the lower radiator hose connects to one end and the other end goes into the water pump You must remove the intake manifold

...water pump lower tube. 6. Remove the engine mount nuts. Lower the vehicle. 7. Remove the cowl extension panel. (Thats theone with the wiper arms go through). 8. Disconnect the water bypass hose and ...

...tube. Install the water pump pulley and tighten the bolts to 20 ft. lbs. (27 Nm). Install the accessory drive belt. Install the cooling fan and shroud. Fill the cooling system. Connect the negative ...

Question about Plymouth Voyager

2 Answers

...tube also, right above water pump, if that's right, have you checked that for possible leak? As far as tube having a leak under intake, yes I've heard of that too. Maybe a pressure test with engine ...

Question about Plymouth Voyager

1 Answer

...tube from the water pump--replace the o ring and put it back in? Or do I have to remove the water pump to replace the o ring? Yes you can remove the tube if its a V8. If its an inline 6 cylinder you ...

water pump has to disassemble the front of the engine time to remove the belt to replace the pump tube If you have to remove the intake manifold to ban the base where the nozzles and have a good space

Question about Plymouth Voyager

1 Answer

...tube from water pump. Discard the old tube O-ring. Remove seven water pump mounting bolts. Loosen clamp at water pump end of bypass hose. Slip bypass hose from water pump while removing pump from ...

Not finding what you are looking for?
1994 Plymouth Voyager Logo

630 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Plymouth Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...