1994 Plymouth Voyager "remove brake light switch" Questions

Ad

Question about Plymouth Voyager

1 Answer

brake lights won't go off, even when I turn the car off so I remove the bolt on the battery so it won't eat up my battery. Please help replace brake switch. Located on brake pedal, just above pedal on

Ad

Question about Plymouth Voyager

2 Answers

...switch behind brake pedal try removing the panel under the dash board and follow the brake to the point where it meets at a joint. be sure this joint is not loose or even over tightened. good ...

Ad

...brake. This happened after using a duplicate key and the ignition tumbler is hard now. Could it only be the key tumbler and how can i bypass it to start the van and go to the next garage... 30 miles ...

Question about Plymouth Voyager

1 Answer

...Remove the bolts holding the brake switch to the firewall using a socket wrench. 5. Remove the electrical connector on the brake switch by pulling it straight off the switch. 6. Slide the switch off ...

Question about Plymouth Voyager

2 Answers

...brake light switch. Remove the switch. Installation is the reverse of removal. All lights work on my 95 two dr thane except back parking lights, brake lights good, turn signal good, just no power to ...

...brake pedal area unplug electrical connector .remove the cotter pin and pull switch and power brake booster pushrod off the pin.then slide switch off power brake booster pushrod dont lose small nylon ...

Remove the panel covering the brake pedal assembly and access the defective brake light switch. An older style faulty switch will require a socket wrench to remove the bolts holding the switch body to

...for brake lights, lights staying on is caused by bad brake light switch, which is under the steering column on the brake pedal, remove switch replace with new switch, re-install fuse for brake ...

brake light. Remove rear shelf Un-clip high-mount brake light from rear shelf, arrows. Install in reverse order of removal. NOTE: The bulb holder base plate contains soldered- in light emitting diodes

Question about Plymouth Voyager

1 Answer

...CONNECTOR FROM BRAKE SWITCH. REMOVE THE COTTER PIN.AND DISENGAGE THE BRAKE LIGHT SWITCH FROM THE MASTER CYLINDER PUSH ROD AND FROM THE PIN ON THE BRAKE PEDAL. PUT EVERY THING BACK VISA

Not finding what you are looking for?
1994 Plymouth Voyager Logo

630 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Plymouth Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...