...check all vacuum lines and hoses for leaks. The most common leak is the PCV hose. Inspect that carefully and look for a hole in the hose.Keep us updated and dotn forgetted ti rating this free
Question about Mercury Mountaineer
...Vacuum hose diagram please? Question edited for clarity and spelling. Question moved to make model category. Same as Ford Explorer. Click the link and also click on the Images tab. ...
...hose. if vacuum is still not present, or if you have vacuum but it does not go away no matter where the heater control is placed, suspect the control in the dash.. If the vacuum operation is correct, ...
...oulet, the enfine is the vacuum source, the vacuum hose comes in on the passenger side, the engine vacuum goes to a vacuum tank, then the vacuum from the storage tank goes to the controls in the
...vacuum hose. Please do locate it for if the vacuum hose is loose/worn it can result to this kind of issue during cold start ups and even when hot. Please do check very carefully. Hope this helps and ...
vacuum hose diagram no vacuum to heat control valve See Mercury Website.
...that is stuck open or may be the cause or may be unrelated. What I recommend is to first check the vacuum hoses on the sensor/flowmeter and also check the hoses from the EGR solenoid to the EGR
Hose between Intake manifold and brake booster. Follow the brake booster branch out to other vacuum devices. Heater control valve Just listen for vacuum noise. Locate and replace the vacuum tube. ====
02 mountaineer no vacuum at heater control valve i have a 02 mountaineer and the heat stopped working the water pump and thermostat are good have good pressure on both hoses and it does not over heat ...
...vacuum hose connect to? I have a looses vacuum hose and no one can figure where it goes That statement is not true Any repair shop or dealer has knowledge or reference material, to resolve the issue ...
942 questions posted
Usually answered in minutes!
658 Questions
524 Questions
377 Questions
323 Questions
250 Questions