2001 Mercury Sable "pull fuse car radio" Questions

pull the fuse out .only pull one at a time.each fuse has 2 flat prongs with a small piece of wire connecting them,if the wire is not there the fuse is blown. it should look like this U , not this I I

...change it The radio light is a small bulb inside the radio, pull the radio out, remove the top cover from the radio chassis and the bulb is right there, most parts stores carry this little peanut ...

...pull the fuse or disconnect the battery. Warning, disconnecting the battery WILL reset things like radio settings and clocks. . Now get yourself a flat-head screwdriver. You want to carefully unsnap ...

fuse out of a critical item if you are going to be driving the car. Don't drive with a critical item off because you pulled the fuse. You may find that an item that is ON when it should be OFF may

...fuse looks good than pull the radio out and check the fuse to the radio, if fuse looks good to the radio, check the power wire to the radio making sure you getting 12 volts. if there is power to the ...

...fuse is pulled it drops another 1.2A. I disconnect the radio, amp, CD player and rear entertainment system and it still draws 3A unless the fuses are pulled. Any ideas? pull fuses or relay until ...

Car will not start after I pulled the fuse for my radio I pulled the fuse for my radio after it appears to keep trying to unload a disc. The car ran fine 5 minutes before and then will not start after

...fuse compartment is on the passengers side at the end of the dash. pull the tab and look inside of cover or owners manual for location of fuses fuse is in the relay box located in the engine ...

...fuse and at radio connector. Check with Ford to see if there is a reset because of losing power. You may have to have them do a reset code. I've had bad luck with XM Direct Connect; the older XM ...

...pull the fuse panel off! Secondly turn your car on! Thirdly, pull the fuse out for a minute! Fourthly, put the fuse back and push the power button and it will fix the problem! Don't forget to put the ...