2001 Mercury Sable "drive belt sabre" Questions

Need pattern for drive belt on 2001 mercury sabre Here's a link to the diagram you need. http://www.gates.com/common/part_locator/view_diagram.cfm?id=S7021

...belt. There should be a square hole in it. that should fit a 3/8 inch drive socket wrench or breaker bar. Use that to remove the tension from the belt and remove - do the same to install new belt 93 ...

...drive belt - alt on top of motor back toward windshield - p/s is at bottom of motor toward windshield - lean over motor or slide arm down around alt. - when not running and not hot - unscrew cap - ...

...drive belt and the accessory drive belt. Unbolt the ignition coil pack and position it out of the way. Unfasten 15mm bolt, then remove the supercharger belt tensioner. Install a suitable engine ...

...drive it an will crank for about 7 or 8 times whith no problems then it will start acting up again an now i cant get it to stay running Hi, Improve the Fixya.com experience for everyone by voting! ...

...drive/serpentine belt for '97 buick le sabre 3.8? do u have to remove engine mount/bracket or just engine mount? You don't have to remove the mount. Go thru the wheel well on the passenger side and ...