1999 Mercury Cougar "brake pedal pressed indicator light" Questions

Ad

Question about Mercury Cougar

1 Answer

...5. Door Ad-jar 6. Bulb failure. Indicates an exterior bulb is out.This will illuminate until brake pedal is pressed after starting engine unless of course one of the brake lamp bulbs is burnt

Ad

...brake pedal fog light on dash lights up and with headlight/side lights on indicate left or right side lights flash on back end. HELP front wipers on indicte left or right rear wiper comes on wipes in ...

Ad

Question about Mercury Cougar

1 Answer

...brake pedal pressed or rear fog lights operated. Indicators glow when side lights on. High level stop lights not working at all. Rear fog warning light on dash comes on when brake pedal operated or ...

...when lights are turned on. Thus, brake lamp stays on and no brake indication when pedal is pressed.. check the brake pedal switch, behind upper part of pedal. it may just need adjusting or it is

Question about Mercury Cougar

2 Answers

...brake pedal, the left signal light indicator on the dash dimly lights up and flashes rapidly. If I make a left signal while the left signal dash indicator is lit (eg. I have pressed the brake pedal ...

Question about Mercury Cougar

2 Answers

...brake pedal, see if stop lamp goes out? You may need to check stop lamp switch and brake pedal arm? Pull that fuse in diagram, see if it kills the stop lamps? At the bottom left, in diagram, see the ...

...brake pedal hangar. Normally, when you press the brake pedal, this switch loses contact with the hangar, and the brake lights come on. If the switch gets broken or out of adjustment, the brake lights ...

...brake pedal. They also do not work, when I turn on the hazard switch. They do not work when I use the turn signals, either. They do work, when the headligh The master lighting switch light comes on ...

Question about Mercury Cougar

2 Answers

...brake light switch (usually mounted at the top of the break pedal arm). The switch will have voltage on one wire....when the pedal is pressed, the switch closes the circuit and sends voltage to the ...

...brake pedal being hard to press I would say that the engine stopped hence no vacuum -no power assist from the booster.- hard brake pedal. The lock uo feeling may come from the engine seizing up while ...

Not finding what you are looking for?
1999 Mercury Cougar Logo

1,914 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Mercury Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...