1999 Jeep Wrangler "light" Questions

I have a 2000 Jeep Wrangler Trouble Symptoms: -When lights are on, brake lights (all three) remain illuminated and only flicker when brake pedal is depressed. Facts: -With lights off, dashboard lights

left rear turn signal and brake light dont work The left rear turn signal and brake light on my 1997 Jeep Wrangler don't work. I have replaced the bulb, flasher, and signal switch. The bulb lights up ...

BRAKE AND TAIL LIGHTS DON'T WORK. HAVE REPLACED BRAKE SWITCH AND LIGHT SWITCH. NO CHANGE. LIGHTS ARE GOOD, CAN HOT WIRE AND RUNNING LIGHTS WORK. ALSO WHEN HOT WIRED DASH LIGHTS COME ON Hi. Test with a

brake lights on drivers side not working just brought yesterday and neither the brake lights on driver side work or the third brake light..... Went and bought new light kit still not working. Lights ...

...I purchased all of the required parts (i.e. trailer flat four wiring harness, new trailer lights). I wired the trailer with the harness and installed the new lights. All of the lights work, ...

98 jeep tj, dash light/taillights/licence plate light don't work I replaced blown 20 amp fuse, turned headlights on and blew fuse immediatly disconnect head lights, and replace fuse. Then turn the ...

99 JEEP BRAKE LIGHT WONT WORK..THIRD BRAKE LIGHT WORKS 99 JEEP BRAKE LIGHTS WONT WORK..THIRD BRAKE LIGHT WORKS..FLASHERS WORK..TURNSIGNALS WORK, EVERYTHING ELSE WORKS...WHATS SHOULD I DO??? PLEASE ...

New Fog Lights Won't Work Put in new head lights and fog lights...but new fog lights won't work. Put back in old fog lights and they don't work either now. check fuse 19 in the fuse blocks under the ...

2003 jeep wrangler: all exterior lights went out except for headlights and fog lights. Dash lights also out. Have you checked the fuses? Headlights are usually on a fused link or fused differently ...

replacing the front light beam? Assuming that you have a TJ with round sealed beam lights, you must remove the chrome bezel that covers the four removal screws that hold the light in place. Remove the