2004 Chrysler Sebring "turn signal switch 2005" Questions

where is the dimmer switch located at? it is called the multi function switch now, the turn signal handle assembly is the switch it's self

...lights, but only pulls out when the headlights are on, If I remember correctly the switch is on the turn signal. I think you have to push the turn signal in toward the steer column. Hope that

...TURN IGNITION SWITCH ON AND WAIT 3 SECONDS RETURN TO OFF POSITION AND REMOVE KEY. FIRST AND SECOND PROGRAMMED KEY OPERATIONS MUST BE PERFORMED WITH IN 15 SECONDS. INSERT SECOND PROGRAMMED KEY AND ...

switch. 2 Complaints: 2004 Chrysler Sebring Visibility: Defroster ... www.carcomplaints.com/Chrysler/.../visibility-defroster_defogger_syste... The 2004 Chrysler Sebring has 2 NHTSA complaints for the

...turn signals all STOPPED working. All were working properly when I turned vehicle off. Convertible top still retracts, thank goodness . . . 98 degree heat. All fuses and circuit breakers check fine. ...

...good and all function normally until the brakes are on. Sounds like a faulty turn signal switch. The brake light wire is routed through the turn switch, so it appears the turn switch has gone

...turn signal switch. The cruise and turn signal are on the same switch. The brake lights go through the switch before going to the brake lights. And the turn signals don't work with the ignition off. ...

...Turn Signal Lamps The body control module (BCM) is responsible for controlling the turn signals and hazard lamps. When the turn signal switch is placed in either the left turn or right turn position, ...

...turn signal flashing unit/relay? The right turn signal lamp illuminates when the brake pedal is pushed. Sounds like your tail light board may be shorted,switch the board to the other side to see if ...

turn signal, the right signal comes on and the other way around. I also noticed that when the signals don't work, at the same time the wipers & washer fluid don't work too. I took it to the dealer