2004 Chrysler Sebring "scan hookup" Questions

...hookup to the computer thru a connector, usually under the dash by the drivers knees. The scanner will read the fault codes stored by the computer. Many parts stores, such as Autozone and Advance, ...

...hookup of jumper cables. What to check ? Find the drivers door module and the memory seat module. All the orange wires should have power to them. If they don't than you need to go back and check ...

...can try to remove the positive battery cable and leave if off for about 30 minutes and sometimes that will allow the computer to reset but the best thing do is hookup a scan tool and reset the

scan tool to DSL hookup. wont connect Are you trying to hook up an OBD II code reader? if so then your car is not OBD II compliant. You need a GM OBD I scan tool. If it just isn't "talking" to the

...on mileage...and the O2 light came on...what does that mean? most likely that your O2 sensor has gone bad. this affects fuel mileage and power you need to hookup a scan tool and have it checked

and engine revs up and down most likely it's your idle air control valve the pintle inside builds up carbon on it. if you have access to a scan tool hookup to the dlc and you can test pintle % opening

hookup in a 2003 VW Passat All of the scanner ports on cars are required to be within a certain distance of the steering wheel. Typically they are not far under the steering wheel. Look for a cover if

...SAFE SIDE. My first guess is that your VSS (vehicle speed sensor) is not working. This reports speed to ecu, tcu, and abs systems. Should be able to hookup a scan tool and find a code relating to

...side door, they look like pins that are spring loaded, they get worn and this creates a poor connection, the ford dealer can hookup a special scan tool to id which switch is the problem

...is the diagnostic / scan tool hookup located? Are the codes the same between the Riviera and the Regal? Under the driver side kick panel. There's a little door that slides open. It's right under ...