2004 Chrysler Sebring "resetting oil change needed" Questions

...change oil message on your cluster. You need to press step until oil change mileage appears on screen and then just press reset. If you are inquiring about the oil pressure swith on the engine there ...

oil change drove home now it wont start. it wont even turn over. everything works except the radio, relays and fuses r good. can anyone tell me whats wrong with it Hope you got a good deal on that oil

oil. From what i can find, I think it's the transmission solenoid pack. Does it need to be replaced? Can a do it yourselfer do it? I need info on how to remove and replace, so I can decide if I can do

oil change indicator.This light is part of the onboard diagnostics.Good luck! I have a 1997 sebring convertible and the engine codes will not clear for engine mis-fire. We disconnected the battery for

...oil seepage, replaced spark plugs, crank sensor, got a "good distributor, still no start until I replace the computer. Starts but cuts out right away!! Heard it may be a security thing? See if ...

...change oil light I need to know how to reset my change oil light on my 2001 Grand Am SE. I just recently bought this and changed the oil in it and now I need to reset the light, but I don't have a ...

...resetting oil service light?if so, you may need an oil reset tool, like, oil reset tool add4310good luck just did an oil change and the odometer on dash still says change oil. how do we change it or ...

change the oil keep saying need oil change on a 2001 gm i believe you turn the ingition to the run position with the engine off and with-in 3 seconds step on gas pedal 3 times all the way to the floor

...OIL CHANGE LIGHT How to Reset the Engine Oil Life System The Engine Oil Life System calculates when to change the engine oil and filter based on vehicle use. Whenever the oil is changed, reset the ...

...CHANGE OIL when oil change is needed, based upon engine oil temperatures and driving patterns. After changing oil, reset oil life indicator. 2. To reset, turn ignition switch to ON position. Do not ...