2004 Chrysler Sebring "hot change heater resistor" Questions

...it blows if the wire gets real hot you need to change the heater blower motor. You will probably need to change the heater fan motor resistor. follow the heater fan wire and it will go to the ...

...wire should be hot with the switch on LOW.If any of these are not as stated above, then you either have a bad A/C - heater control unit, or faulty wiring between the control unit and the

...heater blower only works on full power Air con, hot, cold all working. I've checked the resistor and looks perfect. Have bought another heater blower unit and changed the existing one and the ...

...change switch I assume you mean the heater fan only works on maximum speed? Usually this signals the heater speed dropper resistor has failed, though it could be the switch or wiring. The resistor ...

heater core hoses hot, fully? if one is cold the core is blocked. (flush it out) 4: Ok, we have hot water coolant to core (heater core) so is the damper open?, yes, then now you have heat for sure. if

...thermostat still no joy can you help have u allso checked that the water is acually going into the heater , all feel pipes where they go from engine bay to see if they r hot allso might be air ...

...hot, the doors get stuck due to corrosion around the bushing(?). Nissan said that I just might need to replace the actuators, the blower resistor and all three doors. Did the switch break because it ...

...heater blower motor has two hot wires running down two front blower motor when and ignion is on changed fan switch,motor,looked at resistor, did continuity test 0n resistor it was ok what can i do. ...

...heater core hoses are hot to touch and the coolant is full if the blower motor motor is working then its a blocked heater core or a faulty shut off valve ,i would need to get my head under the bonnet ...

...change the thermostat if the engine temp is ok then grab the heater hoses see if they are hot then the heater core is plugged and if the heater hoses are hot then there is a problem with the heater ...