Question about Chrysler Sebring
...the rear timing covers. They don't seem readily apparent. Crank mark is obvious but cam marks arent. There are two notches in the tin timing covers behind the cam gears. At about the 2 oclock ...
...2 triangles pointed at each other, one on the gear one on the block. The cam gears line up to each other, draw a line in-between them, one mark pointing at the other, no marks on the block just the 2 ...
Question about Chrysler Sebring
...2.5 Coupe for a friend . I've had to replace the engine due to cam bearings locked up (oil blockage in the head ) So they purchased a used engine and so it being used i told them that they probably ...
...2.4L dual overhead cam. I tried to follow the factory shop manual as to where the crankshaft mark should be(arrow on crankshaft pointing to arrow on oil pump housing) and the marks on camshaft ...
...2 door. May have ran out of gas. added 5 gal but still won't restart. see if the cam is turning when trying to start the engine (look through the oil filler cap) if its not, you may have a broken ...
2 cyl #1 still dead Replaced cam sensor performed noid test all injectors noiding. Replaced plugs & wires multiple times has good spark on all cyl's Spark seems to be hotter as you let off on key like
...is not turning with the tensioner old or new. Anytime I grab the belt to put tension on it the cams or crankshaft goes out of time. I've tried to adjust for it but then it goes the opposite way
Question about Chrysler Sebring
Thank you for using FixYa.com! On the 2.4l there are two cam sensors. They are located on both sides, rear of the engine, just under the valve/rocker arm covers. They are bolted on with one 10mm bolt
...off. I went by the book on how to do it and I aligned the marks back up on the chain links to the cams and crank., I turned the crank manually for about 3 full revolutions with no hesitations or ...
Question about Chrysler Sebring
...cam shaft censor code, replaced it 5 times nothing changed, changed plugs and wires to discover #2 plug was all corroded,should we replace the power pack censor seems to be working each time we ...
1,852 questions posted
Usually answered in minutes!
965 Questions
801 Questions
581 Questions
462 Questions
523 Questions