2004 Chrysler PT Cruiser "motor pulley car loose" Questions

...motor at the top to the front of the car so you don't break the coolant reservoir next to the firewall. And be careful you don't break that plastic cover for the timing belts as it keeps dirt ...

...motor did i lose a bearing...also are all the pulleys on the belt supposed to turn, or is there one that is fixed You have a clutch fan on this vehicle. you need to make sure if it is the fan that is ...

motor... when i turn the crank pulley everything seems to turn fine the belt doesnt seem to be slipping i'm just somewhat unsure about a few of the timing marks on some of the pulleys and if its worth

...motor with the belt off negative side of battery disconnected, check all pulleys especially the ac compressor pulley, make sure they turn easily and there is no binding, make sure there is no oil ...

motor you will bend your valves if you havent already done so...If pulley did not come all the way loose due to timing cover not permitting this is a great sign...The camshaft pulley is attatched by a

pulley is loose. I own a 95 K1500 V8 Chevrolet 5.7L 4x4 just wondering if the bearing is worn do I need to replace the whole compressor, or is it possible that there is no problem with the bearing and

...pulley is not turning on my car the belts were changed and it makes a loud squeeking noise Either the belt is so loose that the pulley isn't turning or perhaps the belt was overtightened to the point ...

starter turns motor but crank pulley dont turn pulleys wont turn The balancer and key needs to be replaced. It probably came loose and sheared the key. Check for damage to the crank key way too.

is there a way to replace pulley belt without taking off the motor mount no. isnt it a great design? Its easiest to take the bolts loose then take out the one stud and spacer,and slide the belt out/in

...motor would shake along with a loss of oil pressure on your gauge in the vehicle. By the rattling it can be two things that come to mind either the harmonic balancer is coming apart or the pulley is ...