2004 Chrysler Pacifica "done code odometer" Questions

code P done My car has power. Occasionally when I turn the key the car doesnt start. All the lights and radio are on tho. I then wait a sec then turn the key again and it starts. Every so oftern I get

...done" on the odometer? Tonight when I turned the car on it flashed "done" on the odometer twice and then disappeared. Is my poor car hollering stop?? If you turn the key on and off on a dodge 3 times ...

up though). Not getting a P code. Odometer only showing "--------" then "done." How do I get the odometer to show the P code? You'll need to use a scan tool to get the service codes out of your Sahara

...code (12663155). The "Three-Over" key code is from off to on (not start). On the third time leave it in the on (but not start) position. Digital odometers will display the P codes followed by

odometer isnt working in our s-10 pickup how do we fix the only way is to send it to a place that rebuilds them to be fixed. or you can go to a wrecking yard and get a instrument cluster and replace ...

...code for low battery is P0562. Only "DONE" displayed on odometer inicates that no DTCs are present (no error) and the procedure is completed. PCM memory has been cleared within the last 50 ignition ...

...code or step by step process needed after changing a battery. I was told by my mechanic that there is no connection at all between the battery change and the odometer reading being lost. It seems so ...

...code on an 2007 dodge ram megacab 2500 1.Get in the truck and close the door. 2.Turn the iginition key on and off quickly 3 times without starting it 3.Watch as the odometer numbers disappear and the ...

...code scan is complete it will display the word 'done'. Generally it would be preceeded by any "P" error codes if they exist. You didn't happen to cycle the ignition key 3 times to ON before it showed ...

...repeat three times in succession and then back to "On" (On/Off, On/Off, On/Off, On). At the fourth "On" the odometer will be replaced with codes. If no codes are present then "Done" will