. So check the owners manual for a fuse and then have the body control mod checked You have a problem with the wireless control module. I controls all that. See your local Chrysler, Dodge, Jeep dealer
I replaced the batteries in my key fob and it still doesn't work. I would look at the WCM wireless control module. It is a common problem on Dodge/Jeep key fob issues.
...a wireless control module. They are not too difficult to install but must be programmed through the Starscan tool that your local Chrysler/Dodge/Jeep dealership has! (they will charge for
Question about Chrysler Cars & Trucks
...wireless control module which is connected to the C.A.N. data bus or network . The C.A.N. - controller area network is a communication network for the computer's (modules) on the vehicle to send ...
...wireless entry and all lock functions inoperative.Both fail together and would go intermittent / now just dead. Driver door and windows are operating with door switches. Your windows and your door ...
Question about Chrysler Crossfire
...jeep, I can do this. on older years, only the dealer scan tool DRB or? can only do that. RTM , read the FSM or get it serviced. there are only 2 choices, on cars now. 1 RTM or 2 get help. You can not ...
Question about Chrysler Crossfire
...jeep dealership. During cranking/starting, the ignition switch voltage should drop to about 0.4 to 0.5volts and the switch status should show start/crank. If the ignition switch status shows FF, that ...
Question about Chrysler Crossfire
...Jeep Wrangler Unlimited Crank-No Start. Replaced FP. 2007 Wrangler Unlimited - Died one day last week. Checked fuses, etc. Would crank but not start. Started and ran while spraying carb cleaner in ...
...Apr 19, 2014 Engine Will not Start Due to Wireless Control Module ... 30 answers Jun 21, 2012 starting problem : Jeep Grand Cherokee Miscellaneous 30 answers Apr 1, 2011 More results from ...
399 questions posted
Usually answered in minutes!
237 Questions
31 Questions
33 Questions
12 Questions
1 Questions