...door handle remove the hidden screws be hind mini covers, start from the bottom of panel with panel tool and pry the plastic retainers away from the door plate and remove the wire connectors form ...
have no manual, need to remove driver door panel to get to window motor. need help removing door panel rremove screws holding handle lift up on panel it has "hooks"
...car. look for wires in the loom that are cracked and broken. this is likely.as wires bend each time door is opened. then remove drivers door panel and test then remove loom connector from door frame ...
Question about Chrysler Sebring
...car being a 2004 you may want to try. The wiring for the door windows and locks goes through this door. if you try to pry the window switch off the door panel it will break. its plastic welded to the ...
Question about Chrysler Sebring
...door and push bottom of window up while pushing button remove window, remove track and motor, remove motor from track. reinstall track, reinstall window, push window up into place, cut stick to fit ...
...door, don't remove all the plastic just enough to allow access to the bolt. I used a small rachet to get it out. It is in a stupid spot with not much room but is doable. Once out, the handle is only ...
Question about Chrysler Sebring
...You out will also need to have access to the back of the master switch assembly and/or have the door panel removed. if the other windows are working than it is not a bad fuse or circuit
Question about Chrysler Sebring
...car and saw that the lights on the bottom of the rear view mirror were on - I can't figure out how to turn them off. The manual shows lots of different mirrors - I didn't see one like mine. I've ...
1,238 questions posted
Usually answered in minutes!
1,173 Questions
965 Questions
581 Questions
462 Questions
523 Questions