...wipers either by turning the car off or pulling the fuse then killing the ignition while the wipers are in the parked position and leave the car alone for while I can get them to stop and remain in ...
Question about Chrysler Sebring
...to replace the heating element, or if it is a wiring issue with the control panel. When I start my car and let it warm up before driving, about 10 minutes, there is no warm/hot air blowing. My ...
Question about Chrysler Sebring
...Wipers turn on without me touching the Wiper switch, then won't shut off, till I turn the car's ignition completely off, then they'll start up again, I've replaced the Wiper Switch but that didn't ...
Question about Chrysler Sebring
...Wipers turn on without me touching the Wiper switch, then won't shut off, till I turn the car's ignition completely off, then they'll start up again, I've replaced the Wiper Switch but that didn't ...
My 2005 GMC Jimmy has a rear window wiper and it moves but does not touch the window so it does not clear away rain or snow. Is there any way to tighten this up so it will touch the window? The wiper ...
...fuse box. The fuse box is located under the instrument panel on the left side, for left-hand drive cars. And on the right, for right-hand drive cars. The wiper fuse is labeled "WIPER" or "WINDSHIELD ...
Question about Mitsubishi Cars & Trucks
car. The wipers were working beforehand, I did disconnect the rear wipers and washers at the switch and it worked for about 2 seconds until it blew again. Anyone got any ideas? You have a short in the
2003 chevrolet venture rear wiper motor. I just replaced the wiper motor and the wiper blade does not touch the window on the upper quarter when the blade arm is vertical. suggestions? rear wiper ...
I have a 2007 Town and County. The rear wiper is not touching window by about 1/4 inch. I can press it back down but it will not stay once you turn on the wiper. How can I fix this problem? If it is ...
2003 chevrolet venture rear wiper motor. I just replaced the wiper motor and the wiper blade does not touch the window on the upper quarter when the blade arm is vertical. suggestions? sounds like a ...
1,238 questions posted
Usually answered in minutes!
1,173 Questions
965 Questions
581 Questions
462 Questions
523 Questions