...starter solenoid , use a multimeter to test. 2. If there is no power to the solenoid when the key is turned then the key switch is faulty. 3. Check if this is a diesel vehicle that the HEATER TIMER ...
...2 hours. I went to the store and when i came out and tried to leave it turned over about twice and then stopped. Now it does nothing. All the lights and the radio are working but the car will not ...
Question about Chrysler PT Cruiser
...2 of the sockets , one is control from the engine computer , an the last one will show ground through the starter ! You could also jump the starter from there If you know how ! Fuse # 1 30 amp in the ...
...replacement. This could very well be the starter, but before investing the time to replace that, take the time to throuroughly clean the battery terminals & posts. You'll need to also load test ...
...starter (maybe 2 seconds of crank time), but it turns noticeably slower than I am used to with my previous car (a 2001 Taurus). Is this normal in a PT, or is it something to worry about? I wouldn't ...
...2 pins.I even have power to the yellow start wire on the starter relay when I turn the key to start.Im not getting any crank or fuel pump.I can jump the starter relay and make it crank,and can also ...
...starter..... but all of the diagrams only show 2.... there is a large one coming from the battery, a green one (from the alternator I think) and a third that going on the small screw (I think) anyway ...
Question about Chrysler PT Cruiser
...2 months. I tried starting my car on a cold day a couple months ago,but i just ran the battery down. i bought a new battery but the engine wouldn't turn over. would some starter fluid work? it won't ...
...starter 2.4L Non-Turbo Engine Remove or disconnect the following: Negative battery cable Air cleaner box cover Engine structural collar Starter electrical connectors Starter To install: Install the ...
starter and alternator first more details plz and i may be more help. i have a 2002 crysler pt with a 2.4 ran hot so we pulled head found a broken piston ,,I replaced one piston and replaced all rings
1,827 questions posted
Usually answered in minutes!
1,198 Questions
1,007 Questions
816 Questions
677 Questions
582 Questions