2001 Chrysler PT Cruiser "replace timing belt" Questions

...timing belt tensioner be replaced on 2001 pt cruiser? It is highly recommended that the timing belt tensioner be replaced any time the belt is replaced, if the bearing in the tensioner failed it will ...

...replace the tensioner. Also spin all the pulleys when the belt is off to make sure they all spin freely. The tensioner will be down lower and it will have a large metal roller wheel attached to it ...

Timing belt Question My timing belt failed and I had it replaced. Since then the car is slugish under 2500 rpms - top end no problem. Smog test was perfect. Is it possible the timing belt was ...

...replace the timing belt Its got damage, bent valves. replace every thing on timing belt, tensioner, pulleys, water pump. The head needs to go to a machine shop and bent valves replaced. My pt cruiser ...

...replace my timing belt on my 2001 PT Cruiser I have 120,000 miles on my car.....Can it make it to 122,000??? I am trying to get the money together as we speak........Do you know??? some people dont ...

timing belt Dont drop the motor out, drain ac system, disconnect ac lines in front of timing cover, support engine on jack and block of wood,remove front engine mount assembly to gain access to timing

...timing belt and 60,000 miles and most definitely at 90,000, you most definitely won't hurt anything to go ahead and replace it now. I would recomend doing it now. I have heard of others waiting too ...

...timing belt broke? Low? At 200k miles, I'd be thinking that once it's open, replace the bearings, too. They're likely worn out. Yeah, sounds like a replacement engine to me, too... Cheaper than doing ...

timing belt problem broke timing belt. replaced, now check engine light on. codes say camshaft sensor. replaced with no help. light still on. engine spins for a while before cranking. checked timing ...

...timing belt. Replace them if necessary.Make sure that all timing marks are properly aligned, then loosen the timing belt tensioner and remove the timing belt. Do not allow either the camshaft or ...