2001 Chrysler PT Cruiser "brake adjust" Questions

handleaver pulls all the way up, but dosent hold. You will need your park brake adjusted, If you use it quite often, then you may need new park brake shoes. I don't know what make or model you have, ...

emergency parking brake wont hold car for inspection this is very easy take car to brake shop or tire shop do to all tire shops do brakes and ask for brake check the problem is one of two things the ...

brake lights don't work brake lights are out Here's a link to your stoplight switch,it's attached to the brake pedal,could just need adjusting,when brake pedal is pushed switch is released turning

How do I re-connect the brake switch to my 2006 PT cruiser? the brake tail light will not turn off. Under the brake pedal, the brake switch should be adjustable to how far the pedal is from the switch

...you can try .. Start the car ... move the lever through all the positions several times (foot on brake..). Keep your foot on the brake and then put it in reverse and rev the car. Hard! Try doing

...the car and drive it and can take it out of park with out pushing on brake peddle. can u help me Go to u tube, look for procedure to adjust the shift cable. Its either cable adjustment or a bad ...

pt cruiser parking brake ajustment hi, i have to pull my handbrake right up for it to work properly, is it self ajusting or can it be done manualy? i have a 2001 pt cruser ltd edition. Hello, It is ...

I have a 2005 PT Cruiser and the brake lights will not go off but the funny thing is I noticed that there is a box by the brake pedal that somehow fell and is hanging could this be the problem. I ha ...

We recently replaced the front brake pads and turned the roters on our 2004 PT Cruiser. However, when applying the brakes on a hard quick stop, it makes a god-awful griding noise. Doesn't do it with a

brake light will not go off turned car off and brake lights and rear lights still on Check the brake switch. It will be under the drivers side of the dash mounted on a bracket right next to the lever ...