2000 Chrysler Grand Voyager "brake pedal time hard push" Questions

ignition won't turn Push brake pedal hard and try to wiggle steering wheel back and forth at same time as trying to turn key.

pedal is brake pump on 1992 plmouth voyager, the pedal is hard to push how to fix If you have ABS brakes there is a large brake fluid pump connected to the brake fluid reservoir by two large hoses. It

...brake pedal? brake pedal is hard to push. pads are not new but not worn or making any noise. Car does not pull to either side or dip when brake pedal is applied. _______power brake booster, check ...

...brake pedal and push down this is with truck stopped ,keeping pedal pushed start engine brake pedal should move down more if booster is working check all pipes tp booster This is most likely brake ...

...brake pedal I have a 1996 geo prizm I had a problem with the brake pedal sticking and replaced the caliper and bleed the brakes but now the pedal is soft and sometimes i get good breaking and other ...

...brake pedal,it is usually a spring loaded switch that comes out when the pedal is pushed & the pedal pushes it back in when it is released,this switch may have come loose & is active all the ...

...brake pedal will be extremely hard to push. If you hear a hissing sound inside of the vehicle when the brake pedal is pushed? The problem is the booster.Should you need further help please just ask. ...

...brake pedal to feel hard to push down, and a lot of pressure on the brake pedal is required to make the car stop. Rarely, a vacuum brake booster will develop a vacuum leak, which can cause engine ...

...brake pedal is hard to push in. the car wont/ is hard to stop. i replace the brake pads and the calipers. what could be the problem now? i guess your brake booster is the problem. try this.... engine ...

...brake pedal. you should feel the pedal fade away abit and then become firm. but not hard. if you feel nothing at pedal when engine starts, brake booster is not working! check the vacuum lines