2000 Chrysler Cirrus "ignition switch" Questions

...lights stay on runs the battery down. Could be the ignition lock or switch, but it could be the shifter too. If the shifter is not completely in park, the key will not go to the lock

I need to know how to reset my computer. I just bought it and was told I put the door key in the ignition and now it won't start 1999 Chrysler Dodge Cirrus Stratus RHD LHD Service Repair Manual ...

...and the gasgauge and wippers dont work but somtimes when the key is turnd on and the gassgauge works the car will start and run sounds like the ignition switch, or the ignition control module is

...ignition switch, if you can not find the short area, you have to change the whole wire direct to your fuse box to solve this problem. wire problem is the hardest case for the car, wish you good

...ignition switch. Have the computer scanned; check with any local chain auto parts store in your area to ensure that they offer the service free of charge but all I know do. There are a number of ...

...new ignition maybe the pin in the cylinder broke maybe just have to pull steering wheel an replace switch or see if the problem can be fix on this one.one thing to check is see if all the way in

ignition switch thumbler in a chrysler cirrus How do I remove an ignition switch thumbler in a 1999 chrysler cirrus? You basically have to take the whole steering wheel apart to get to the tumbler. ...

...is turned off until it cools down, If it is the starter turning the ignition switch is worn out and sticking , This switch should be located at the lower end of the steering column. I hope this

my 97 chysler cirrus wont start or jump. lights come but radio doesnt could it be the ignition switch fuse or much worse battery posts are very clean and tight right ?

how to change ignition switch with or without the original key??