Question about Chrysler Sebring
...Replace Ignition lock cylinder w/o key All keys lost. Want to replace the ignition key cylinder but do not have the key to put it in the run position. Anyway to get the old one out without a key?? Go ...
replace with a p0300 code well the p0300 is a general misfire code across all cylinder,,,so its not 1 cylinder,it could be bad gas,,,could be spark plugs and wires are old,could be ignition module,bad
cylinder won't go back in we replaced the ignition switch on our 2002 chrysler sebring. however, trying to reinstall the lock cylinder has been a problem. it stops dead just short of the lock tab slot
...replace the ignition switch on a 1996 sebring convert1ble? or is possible to just replace the lock cylinder? You can just replace the lock cylinder. If thats what you want to replace im guessing its ...
...plugs, wires, & coils. Swapped dead cyl #1 injector with good running cyl #2 cyl #1 still dead Replaced cam sensor performed noid test all injectors noiding. Replaced plugs & wires multiple
Question about Chrysler Sebring
...ignition wont lock in place,just redo it but this time you need to realize that you install the key cylinder with the key in the ON postion,straight into the lock cylinder housing,aligning the ...
replace the ignition of a 2001 Sunfire with a new one, how do i get the old one out?? Put the old key in the cylinder and look on the bottom of the cylinder for a small locking tab. It is really tiny.
...ignition gear replace I just bought a 70 Olds 442 and the ignition cylinder would not go back to the off position. It also turned without the key. I disassembled the steering column section where the ...
...replace the ignition lock cylinder and it will come with a new ignition key. As for the doors/trunk you will most likely have to hire a locksmith to make you a new one. Or you can replace all of the ...
Question about Cars & Trucks
...replace ignition lock cylinder now nothing Someone tried to steal my Moms van. They weren't successful but they screwed up the ignition lock trying. I had to drill out old lock and after doing I am ...
626 questions posted
Usually answered in minutes!
1,173 Questions
965 Questions
801 Questions
581 Questions
462 Questions