1999 Chrysler Sebring "bad map" Questions

...bad MAP sensor. Should I jest replace it or check something else? Replace the MAP sensor you need to test for proper voltages at the map sensor plug terminal and for a poor connection.the other thing ...

...bad map sensor make the car not start I had a bad MAP sensor on my 95 Dakota.Out of nowhere,the truck wouldn't start unless I held the throttle all the way open.I unplugged the MAP sensor,and the ...

...bad map sensor cause mt 2004 sebring to keep stalling? It easily can. The MAP sensor controls how much fuel goes in. If it decides that no air is going into the engine, it might just decide to put no ...

...cold Could be a bad battery connection. Your fuel system may be going bad. Might have a faulty coolant temperature or intake air temp sensor. Could even be a MAP sensor. Is your check engine light

...bad map sensor create a no spark condition? 3 different codes showed on the code scanner - P0700, P0562 and P0113 The coil needs battery voltage ( 12+ ) to function. A faulty map sensor would not ...

...like you did not change those intake manifold gaskets and they are not completely sealing the intake and causing a vacuum leak and the MAP sensor will read high in voltage and cause the bad

chrysler sebring jx 1996 convertible... excessive reving on start up You may have a bad map sensor or idle control sensor. You may need to adjust the idle itself.

...bad ciol pack or cam or carnk sensor need to hook up scanner to find defect Our engine used to do that on our 2002 Chrysler sebring sedan and it was the map sensor, the part costs about $125.00 and ...

going bad on the car, such as an O2 sensor, or a MAP sensor. But, to be economical, it's a very good idea to scan it first to find out which of the hundreds of codes it is. Good luck on this diagnosis

...2.7 will Rev 3 or 4 times in a row the pedal on the floor just idle at 2000 what's my issuw Map sensor and throttle body codes came up Leaking hose to Map or bad TPS, you can test both with