breaks my break lights are stuck on need to locate switch under break pedal look up at the pedal its at the end their somewhere
...my 2000 chrysler cirrus not have brake lights? have changed fuses and bulbs I would say it is your break switch. It is located under the dash, above your gas and break pedal. This will solve your ...
...light but not sure how to remove old bulb without breaking it Depending on your years they will twist out or pull out. And about half the times they break. If it does you can get the rest out with ...
my 1999 chrysler cirrus no break light. bob is good, SW is good, no power on SW Run a new wire to the switch from the fuse box IGN lug
...is supposed to activate the alarm signals you mentioned when the car is hit or someone tries to break
Question about Chrysler Cirrus
...looks like it may be my distributor. this does not have a distributor must likely plug wires breaking
...stalled, but it makes me nervous. I am on oxygen, so I don't want to get stuck somewhere if it breaks down. So it will be going in for sure. Hope it isn't expensive as I am on
...not turning over.. the car wants to turn over when I apply little pressure to the gas pedal, just breaking the wall.. Try changing the fuel filter first if you have not done so already. Also make ...
...light so you can see the closest plug. Then pry directly beside that, so as to put minimal pressure on the panel backing. Gently pry until the first plug pops loose. From there, simply slide the tool ...
361 questions posted
Usually answered in minutes!
391 Questions
244 Questions
193 Questions
168 Questions
124 Questions