Question about Chrysler Cirrus
...transmission, which are the speed sensors. I found one but can't find the other two. HELP!! Thanks, Sergio go to pep boys and by the book for your car! it will tell you everything and anything that ...
...auto transmission doesn't shift properly and my gas gauge is bouncing up and down I found the information,as I searched a little further on the Internet,it turns out to be a fairly common problem ...
...Auto Zone since they scan free of charge. I just want to make sure it is the VVS and not the transmission Control Module (TCM), Check the fuse under the dash and under the hood and look for any blown ...
...transmission is bloked in 2nd IS your automatic broken or will only go into 2nd gear . Will it go into reverse gear or does it start off in 1st and then into 2nd and no other gears . IT sounds like ...
...AUTO ZONE OR IF YOU ARE HANDY CHECK FOR CODES, NO CODES....THEN TAKE THE CAR OUT STEADY DRIVE AT AROUND 45 MPH, GENTLY HIT THE BRAKE PEDAL JUST ENOUGH TO MAKE THE REAR BRAKE LIGHTS GO ON BUT NOT HARD ...
...transmission may even stay in one or two gears. The alternative would be to either let you drive at regular speeds, with the danger of letting you trash your car or stopping you from going anywhere . ...
auto scanner code 1698 after check engine light up in the dash, we scanner the engine , it comes out with code P-1698, wnt to know what is this and howto fix it. The P1698 code means that no digital ...
...transmission won't shift out of 1st gear at the same time. How do you fix it? sounds like a speed sensor to me. If you can make it to Advanced or Auto Zone have them pull the codes and see whats ...
what type of transmission fuid oil does a chrysler cirrus 1996 use Chrysler ATF+4, available at any auto parts store.
361 questions posted
Usually answered in minutes!
391 Questions
244 Questions
193 Questions
168 Questions
124 Questions