1999 Chrysler 300M "valve bent timing belt goes" Questions

...bent valves, take the valve cover off and ck the valve clearances, if you have any that are "way loose" you have bent valves. If you ck them and they are real close, just a little loose, adjust the ...

...bent a valve in the cylinder head. Do a compression check on each of the cylinders if it is low on any this more than likely a bent valve resulting in no power from that cylinder. **** OFF ...

VALVE LOOK AT THE CAMS AND YOU WILL SEE THAT THE VALVES ARE BENT IF THE CAM IS NOT TOUCHING THE VALVES ARE BENT BEFORE YOU ALINE THE CAM GEARS YOU HAVE TO PUT THE CRANK SHAFT GEAR IT HAS A MARK AT THE

...valve configuration - interference or non-interference. In an interference engine, the valves and piston share the same air space. They never touch, unless your timing belt breaks or skips, and this ...

...bent a valve. is it a hard task to tackle yes a bent valve is a very hard task, you must of couse pull the engine cylinder head off and then replace the valve, this takes special tools. You need some ...

valve is bent it will be stuck open therefore there will be lots of clearance between the rockers and followers so moving the rockers up and down ( wiggling ) if you feel looseness, that valve is bent

...only has a timing chain, no belt, cannot add additive, if timing chain making some noise, need to have it checked out and fix, if chain goes bad, it will bent valve's, now you have a major

in-laws car. 3. No. 4. I think valves were bent due to timing belt breaking and son-in-law trying to start car when it went dead. 5. Will do this if timing belt reset don't work. Thanks for your reply

WHAT IS THE MILEAGE TO CHANGE TIMING BELT ON MY 2000 ELANTRA Recommended at 60,000 miles, also that engine is an interference engine ( will bent valve if timing belt goes bad ).

...a timing belt or timing chain? It's has a timing belt, also it's an interference engine, if belt goes bad it will bent valve's . on my xterra 2001 6 cyl dashborad indicator "set" what does this