1998 Chrysler Town & Country "starter" Questions

Ad

Question about Chrysler Town & Country

1 Answer

car won't start makes clicking noise Is this a battery problem if this clicking is comming from the starter then the problem is burned electrical contacts in the starter solenoid, this is common with ...

Ad

how do you change the starter on a 96 town and country Disconnect the negative battery cable. Raise and safely support the front of the vehicle securely on jackstands. Disengage the solenoid wiring ...

Ad

Question about Chrysler Town & Country

1 Answer

WHERE IS THE STARTER we need the starter location ASAP we are replaceing the RED(hot) battery cord and its taking forever to find the starter any help? The starter is located in middle of 96 3.8L T$C ...

Question about Chrysler Town & Country

2 Answers

When I turn key I hear a cleck but starter will not turn. Battery and starter both are good. You will need a new cylinoid when it goes out all you get is a click.. if the starter is good and battery ...

Question about Chrysler Town & Country

1 Answer

How to change a starter in a 2007 town and How to change a starter in a 2007 town and country minivan 1. Disconnect the negative side of battery. 10mm ratchet. 2. Jack the front of the vehicle. 3. Use

Question about Chrysler Town & Country

1 Answer

starter i'm trying to remove the starter on my 2001 chrysler town and country, but i'm having trouble finding all of the bolts...any advice You'll find 2 bolts that attatch the starter to the trans. ...

Question about Chrysler Town & Country

2 Answers

...several times before the stater will engage First thing to look at is the ignition switch starter contacts as it seems the contacts need a bit of coaxing to make. If they prove to not be a ...

new battery van would click then started one day and starter would not shut off got new starter fine for two days then does same thing and started smoking what is causing this if there is a relay in ...

Question about Chrysler Town & Country

2 Answers

...starting my Chrysler town and country and when I release the ignition key back to run position the starter continues to run. I then turn off the ignition key and the starter still runs. The only way ...

Question about Chrysler Town & Country

1 Answer

On a 2001 Town & Country, how do you locate & remove the bolts holding the starter? I can find one bolt, but I'm going nuts trying to remove the starter. 1. The Upper Bolt is easily ...

Not finding what you are looking for?
1998 Chrysler Town & Country Logo

568 questions posted

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...