1998 Chrysler Sebring "shift" Questions

gear shift will not shift from park You hve 2 components to look at,one is in the brake pedal,is the switch for the stoping lihts and the other is in the shift knob,got to take some part off from the ...

gear shift will not shift out of park If car has safety shift sensor verify is working properly, located at the brake pedal assembly under the dash. If you have to press the brake before shifting out ...

2007 sebring...won't shift out of park has anyone resolved this issue ? what was the repair cost ? is this recurring ? thanks sound like brake transmission shift interlock solenoid fuse.if fuse good ...

Transmission Sometimes slow shift from Neutral into Drive and First Gear has a delay and shifts with a vibration and thud Transmission Suddenly now Sometimes slow shifts from Neutral into Drive and ...

2007 sebring shift solenoid d have a code po765 shift solenoid d. car wont shift out. what can i do and where it located Hi there:DTC P0765 - Shift Solenoid D MalfunctionThe shift solenoid is located ...

cant shift out of par 2007 sebring press brake , can hear release lever clicking under shifting console but not releasing lever to shift out of park There is a possibility there is a problem with the ...

tranmission shift problem 2000 sebring convert. will only shift into 3rd geat at 4000 rpm or above. Even then it is a hard shift. When decelerating, there is a hard jerky upshift to 2nd gear. What's ...

Car will not shift out of park SOUNDS LIKE BROKEN OR FRAYED SHIFT CABLE OR SHIFT LINKAGE IS RUSTED UP OR broke http://www.motortrend.com/cars/1996/chrysler/sebring/recalls/index.html This is a list of

2005 Chrysler Sebring wont shift correctly I have changed the TCM and the Throttle Control Sensor..neither one has fixed the problem. It will do ok and then it will start not shifting again. When you ...

will not shift above first gear when in drive and rpm hits it 2500 or so will not shift to the next gear does any one know where the speed sensor or shift control module is located run fault codes to ...