1998 Chrysler Sebring "rpm" Questions

My 99 Sebring 2.5L idle speed has suddenly increased. My 99 Sebring 2.5L used to idle around 500 rpm now it idles somewhere around 1,300 rpm to 1,400 rpm. Engine has 153,000 miles and has had cam ...

rpm does not drop below 1000 I get in and start the car the rpm is at 1000. I rev the engine the rpm goes up I let off the gas the rpm drops to 1000 and stays there, Shouldn't it go to 0 if my

rpm won't go over 2300 my 04 sebring cuts out at 2300 rpm. why? TRY A TUNE UP OR THE COIL PACK I HAD THE SAME PROBLEM i also have same problem ; i replace my engine for my 2004 sebring convertible and

Sebring 06 wont go over 2500 rpm I have this problem; I replace my engine for my 2006 sebring and than i can not go over 2500 rpm that means i can not go over 60 miles ... how can i fix it i have no ...

2006 2.4 Sebring starts cutting out at 3500 rpm but starts well cutting out at 3500 rpm I have the exact same problem as sangriaonur.....can anyone help me ?

I have a 1996 chrysler sebring and I'm having the check engine sign show on my car. Every time the rpm increases so does the oil gauge I was wondering if it was related to the oil filter or something ...

...have your foot on the brake when you stop Hi feel like you have a problem with throttle body the RPM are too low check the RPM if the RPM are lower then 1000 at idle and park position then change ...

...a sensor for speed and idle. In most cases depending on where you are the idle should drop to 700 rpm in most 2.4 if this helps you. When the car is cold it can range between 700 and 1000

what causes a cold engine rpm not to drop as engine gets warm on a morning i start the car with remote to warm up for about 10 mins. the idle is still at 1200 rpm Vacuum leak at intake manifold gasket

first start it in the morning it idels fine then when it warms up at stops the idle go's to 800 rpm or st my 2003 chryler seabring water pump went out i changed it got the car back together when i